Repair industrial electronics

Industrial electronics repaired, function guaranteed

Industrial electronics is a sensitive player within production plants, the failure of which has far-reaching consequences for companies. All it takes is a defective inverter, a failed PLC controller or a control board that is no longer intact and the entire production process comes to a standstill. A minor failure that looks like a worst-case scenario. But it is often enough to repair the relevant component and production can start again. Such repairs are possible much more frequently than companies often realise - and at a much lower cost than it would cost to purchase a new machine, and also cheaper than replacing the relevant assembly.

The time factor is at least as important, as a repair can almost always be carried out much faster than procuring and installing new assemblies, if these are available on the market at all. Especially with discontinued components, it can be very time-consuming to procure them. Last but not least, repairing instead of replacing also means protecting the environment because resources are not unnecessarily strained.

That is why we at retrofit GmbH have made it our mission to repair industrial electronics wherever possible before we consider replacing them. Thanks to our experience and in-depth expertise, we guarantee the function of the repaired component after a successful repair and test run. So that you can produce safely.

This is how we proceed when repairing electronic components

For us, every repair begins with a thorough examination and analysis of the defective system so that we can determine exactly which component has which specific defect. This enables us to give our customers a reliable estimate of the time and costs involved immediately after the analysis, so that the cost-benefit ratio can be reliably estimated. This means that customers do not take any risks when actually commissioning a repair.

This initial analysis phase is followed by the actual repair. Here we set ourselves no limits in the range of repairable electronic industrial components. Whether it\'s circuit boards, PCBs or mainboards, PLC controls, frequency converters or control panels - we serve the entire extensive range of common and specialised industrial electronics.

Procurement of components

Even though repairs are always the first choice for our customers for reasons of time and cost, they are not the only route to success. It is just as important for us to procure and install electronic components if this is fundamentally possible. For us at retrofit GmbH, it is of secondary importance whether the required components are still available from the respective manufacturers or have already been discontinued. We have various options worldwide to realise the procurement in almost every case.
However, before we initiate the procurement of circuit boards, PCBs, PLC controls or converters, we check on a case-by-case basis whether the cost-benefit ratio is favourable for our customers. In the positive case, we thoroughly check the functionality of procured components before installation and, of course, guarantee them.

We are also happy to be at your disposal at any time in an emergency! Please do not hesitate to contact us.

Increase the reliability of your machines now
Arrange a consultation now